79 Series LandCruiser Stud Pattern — What You Need to Know
The 79 Series stud pattern matters when choosing aftermarket wheels. This guide covers the spec and what fits.
1. Factory Stud Pattern Specifications
5x150 (5 studs on 150 mm pitch circle diameter). M14 x 1.5 thread. 21 mm hex factory wheel nuts. Hub bore 110.3 mm. Factory rim 16 x 7 inches with approximately ET+5 mm offset. Factory tyre 265/70R16 (31.6 inches overall diameter).
2. Specifications Constant Across All Years
Pre-2007 1HZ, V8 era 2007-late 2024, 2.8L late 2024 onward - all share the same 5x150 stud pattern, same hub bore, same thread. Toyota has not changed the wheel mounting system throughout the 70 Series production life.
3. Wheel Torque
209 Nm (154 ft-lb) for steel wheels. 131 Nm (97 ft-lb) for aluminium alloy wheels. Always retorque after the first 100 km following any wheel removal.
4. Compatible Wheels
Any 16-inch or 17-inch wheel with 5x150 stud pattern, 110.3 mm hub bore (or hub-centric ring), and M14 x 1.5 thread will fit. ROH, CSA, Jova, Dynamic Wheel Co, Method, NYC Wheels all make 5x150 wheels compatible with the 79.
5. Same Pattern as Other Toyota 4WDs
The 5x150 pattern is shared with the 100 Series, 200 Series and 300 Series Landcruisers. Some Tundra (US-market) trucks. The pattern is Toyota's heavy-duty SUV pattern - different from the 6x139.7 used on the Hilux and Prado.
Frequently Asked Questions
What stud pattern does the 79 Series have?
5x150 - five studs on 150 mm PCD. M14 x 1.5 thread. Same across all production years from 1999 to current.
Does the 2024 facelift have the same stud pattern?
Yes. Unchanged from V8 era. Same 5x150 pattern, 110.3 mm hub bore, M14 x 1.5 thread.
Will 100 or 200 Series wheels fit a 79?
Yes. Same 5x150 pattern. Confirm offset and rim width matches 79 Series clearance requirements.
